Fig. 1 Terraced houses, fully covered roof
We also fit charge points and home batteries, and do electrical work to the Belgian wiring code (AREI). Every job starts with a site visit, and the figures are based on your own consumption.
Four digits. Type your own postcode. Try , , ,
Yes, we come to Oudenaarde.
Core area: site visits on any working day. Our depot is here.
We set out from Oudenaarde every morning. In the core area we come out on any working day. Further away we group visits on Tuesdays and Thursdays with other appointments nearby, so we do not spend half the day in the van.
Core areaany working dayRonse, Zwalm, Brakel, Horebeke, Maarkedal, Kluisbergen, Oudenaarde, Kruisem, Wortegem-Petegem
Extended areaTue and ThuAnzegem, Avelgem, Merelbeke-Melle, Geraardsbergen, Sint-Lievens-Houtem, Herzele, Lierde, Zottegem, Deinze, Nazareth-De Pinte, Gavere
| Postcode | Municipality |
|---|---|
| Ronse | |
| Zwalm | |
| Zwalm | |
| Brakel | |
| Brakel | |
| Horebeke | |
| Maarkedal | |
| Maarkedal | |
| Maarkedal | |
| Kluisbergen | |
| Oudenaarde (your postcode) | |
| Kruisem | |
| Kruisem | |
| Kruisem | |
| Kruisem | |
| Wortegem-Petegem |
| Postcode | Municipality |
|---|---|
| Anzegem | |
| Avelgem | |
| Avelgem | |
| Merelbeke-Melle | |
| Geraardsbergen | |
| Geraardsbergen | |
| Sint-Lievens-Houtem | |
| Herzele | |
| Lierde | |
| Lierde | |
| Zottegem | |
| Deinze | |
| Nazareth-De Pinte | |
| Merelbeke-Melle | |
| Nazareth-De Pinte | |
| Deinze | |
| Gavere |
We do not quote without a site visit. The installer who will later run the job comes to look first. Within five working days of the visit you get a quote with the calculation attached.
Supply capacity, residual-current devices, earthing and free space for new circuits. We note what an AREI inspection would flag today.
The current boiler, the pipework and what is in the rooms: radiators or underfloor heating. We calculate heat loss room by room so the heat pump is sized right.
Orientation, pitch, shade from trees and chimneys, the state of the tiles. We measure on site with a laser.
Distance to the boundary and to the neighbours' bedrooms, noise, condensate drain, wall bracket or plinth.
Your annual statement and, with a digital meter, your monthly peaks: the highest quarter-hour of use in each month. Their average sets part of what you pay under the Flemish capacity tariff.
Four steps. You choose the time; we confirm by email or text.
This is the sheet you get from us after the works: what was fitted, at what output and how long it took.
Board and panels first, the heat pump a month later, so the family could stay in the house.
The old heating-oil tank was taken out of service by an approved tank firm.
The inverter is a hybrid, so a home battery can be added later without new wiring.
Example prices
Example prices, including 6% VAT for a home more than ten years old. The exact rate is on the quote.
The real price follows the site visit. Any extra work is agreed in advance, in writing.
| Installation | What is included | From |
|---|---|---|
| Air-to-water heat pump 6 kW | monobloc, outdoor unit on a plinth, connected to existing radiators | €10,900 |
| Air-to-water heat pump 10 kW | with 100 l buffer tank and 200 l cylinder | €13,800 |
| Heat-pump water heater 200 l | for hot water, in place of the old cylinder | €2,650 |
| Solar panels 4.35 kWp | 10 × 435 Wp, inverter, registration and inspection | €5,300 |
| Home battery 5 kWh | on an existing hybrid inverter | €3,900 |
| Charge point 11 kW | own circuit, up to 10 m of cable | €1,450 |
| New distribution board | including inspection by an approved body | €1,650 |
Some of this work can qualify for a grant from the Flemish government. How much depends on your income, the house and the invoice date, and the rules change often. That is why we quote no amounts here.
After the works we hand you the final invoice, the inspection report, the technical sheets and, for a heat pump, the contractor's certificate: everything you need for the application.
Mijn VerbouwPremie on vlaanderen.be (official page, in Dutch, opens in a new window)
That mostly depends on the insulation and on what is in the rooms. In a poorly insulated house with small radiators we sometimes advise insulating first, or a hybrid heat pump next to the existing boiler. You will hear which after the site visit, with the calculation.
We usually fit panels and charge points within six weeks of your go-ahead. A heat pump needs more preparation: allow eight to twelve weeks.
Yes. A new distribution board or circuit is inspected to the AREI by an approved body before you use it. We arrange the inspection and you get the report.
Since 2023 part of the Flemish grid charge depends on your average monthly peak: the highest quarter-hour of use in each month. A heat pump and a charge point running at the same time push that peak up. We set the charge point so that does not happen.
Sometimes, for larger projects. Send us a message with your postcode and what you would like fitted.
Pick a time in the schedule. You get a confirmation the same day, and the installer rings the day before.
Go to the scheduleA fault on an installation we fitted? On a real site the on-call number would be here.